PlanetsⅩ

PlanetsX EN

Injection Molding CAE system for Ansys Workbench

Navi

Injection Molding CAE system
for Ansys Workbench (PlanetsX)

"PlanetsX" is a tool that works with the multi-physics analysis program "Ansys" simulation system. It works specifically with the comprehensive environmental system "Ansys Workbench", making it very easy to operate for beginners of plastic injection molding simulation.

"PlanetsX" provides consistent analysis of plastic injection molding combining warp simulations with flow history on linear structural simulations.


PlanetsX is recommended for:

  • Those new to injection modeling simulation.
  • Those who want better structural analysis of plastic products utilizing flow history.

Why consider flow history for structural analysis?
Considering flow history will reveal the structural strength.

Material characteristics are often thought to be uniform in the structural analysis of plastic products. The reality is that material characteristics caused by the injection molding process may have variances causing defects. Typical molding defects include flow marks, silver streaks and sink marks. These variances impact the strength of the final molded product. To seek them, structural analysis including injection molding simulation is necessary.

Main features

Introduction to main features

Detailed features

Introduction to detail of specialized features

System requirements

Introduction to the latest version of the system requirements

関連する製品

MORE

関連する解析事例

MORE
ユーザインタビュー

株式会社 東芝 生産技術センター様:PlanetsXとAnsysの連携に期待

ユーザインタビュー

生産現場でのPlanetsX立ち上げに向けて

解析結果を適切に評価するには、現場の知見が不可欠

ユーザインタビュー

Ansys Workbenchの自動メッシャーが使えることは大きなメリット。PlanetsXの一層の機能強化に期待

事例報告

射出成形過程の離型時における応力解析

樹脂流動解析と構造解析の連携

事例報告

高品質なプラスチック製光学製品の成形を可能にするPlanetsⅩによる光学性能評価解析

事例報告

ICパッケージのトランスファー成形解析

事例報告

フリップチップ実装の圧着解析

事例報告

繊維配向を原因とする異方性物性を考慮したそり解析

ユーザインタビュー

株式会社 東芝 生産技術センター様:PlanetsXとAnsysの連携に期待

ユーザインタビュー

生産現場でのPlanetsX立ち上げに向けて

解析結果を適切に評価するには、現場の知見が不可欠

ユーザインタビュー

Ansys Workbenchの自動メッシャーが使えることは大きなメリット。PlanetsXの一層の機能強化に期待

事例報告

射出成形過程の離型時における応力解析

樹脂流動解析と構造解析の連携

事例報告

高品質なプラスチック製光学製品の成形を可能にするPlanetsⅩによる光学性能評価解析

事例報告

ICパッケージのトランスファー成形解析

事例報告

フリップチップ実装の圧着解析

事例報告

繊維配向を原因とする異方性物性を考慮したそり解析

ユーザインタビュー

株式会社 東芝 生産技術センター様:PlanetsXとAnsysの連携に期待

ユーザインタビュー

生産現場でのPlanetsX立ち上げに向けて

解析結果を適切に評価するには、現場の知見が不可欠

ユーザインタビュー

Ansys Workbenchの自動メッシャーが使えることは大きなメリット。PlanetsXの一層の機能強化に期待

事例報告

射出成形過程の離型時における応力解析

樹脂流動解析と構造解析の連携

事例報告

高品質なプラスチック製光学製品の成形を可能にするPlanetsⅩによる光学性能評価解析

事例報告

ICパッケージのトランスファー成形解析

事例報告

フリップチップ実装の圧着解析

事例報告

繊維配向を原因とする異方性物性を考慮したそり解析

関連する資料ダウンロード

MORE

Ansys、ならびにANSYS, Inc. のすべてのブランド名、製品名、サービス名、機能名、ロゴ、標語は、米国およびその他の国におけるANSYS, Inc. またはその子会社の商標または登録商標です。その他すべてのブランド名、製品名、サービス名、機能名、または商標は、それぞれの所有者に帰属します。本ウェブサイトに記載されているシステム名、製品名等には、必ずしも商標表示((R)、TM)を付記していません。 CFX is a trademark of Sony Corporation in Japan. ICEM CFD is a trademark used by Ansys under license. LS-DYNA is a registered trademark of Livermore Software Technology Corporation. nCode is a trademark of HBM nCode.