CYBERNET

Multiscale.Sim 論文紹介

Identifying unknown material properties using reverse engineering by combining materials databases and artificial intelligence

  • 発表時期:2023年
  • 学会/論文誌名:EnginSoft NewsLetter

内容

Material constants are one of the most important factors for determining the accuracy of analysis results and are essential for designers to make confident material decisions. For materials with non-uniform microstructures, such as fibre-reinforced composites, failure is initiated by many factors. Typical examples are delamination between layers, fibres, and matrices; fibre breakage; and crack initiation and propagation within the resin. Unfortunately, it is usually very difficult to measure these properties directly by physical testing because the fractures often occur at the microscale level. Delamination strength can be measured by double cantilever beam testing or end-notch bending beam testing. This is the largest scale problem and is easy to characterize directly by experiment.


Ansys、ならびにANSYS, Inc. のすべてのブランド名、製品名、サービス名、機能名、ロゴ、標語は、米国およびその他の国におけるANSYS, Inc. またはその子会社の商標または登録商標です。その他すべてのブランド名、製品名、サービス名、機能名、または商標は、それぞれの所有者に帰属します。本ウェブサイトに記載されているシステム名、製品名等には、必ずしも商標表示((R)、TM)を付記していません。 CFX is a trademark of Sony Corporation in Japan. ICEM CFD is a trademark used by Ansys under license. LS-DYNA is a registered trademark of Livermore Software Technology Corporation. nCode is a trademark of HBM nCode.