[PlanetsX]Analysis Examples

Differences in moldability comparing Injection Compression Molding and Injection Molding

Considering the differences between Injection Molding and Injection Compression Molding especially with regard to injection pressure and pressure on the molded product.
Differences in moldability comparing Injection Compression Molding
and Injection Molding

Warp Analysis due to cure shrinkage of thermosetting resin

Introducing Warp Analysis using thermosetting resin.
Warp Analysis due to cure shrinkage of thermosetting resin

Warp Analysis considering anisotropic properties due to fiber orientation

Introducing Fiber Orientation Analysis using PlanetsX.
Warp Analysis considering anisotropic properties due to fiber orientation

Analysis to prevent hesitation

Introducing case study of improvement in flow behavior in thin-wall by relocating gate position.
Analysis to prevent hesitation

Optimizing gate location

Comparing two gate locations to optimize filling balance and determine the location of weld lines.
Optimizing gate location

Improve filling balance

Comparing two runner volumes on a multiple gate mold to improve filling balance and reduce injection pressure.
Improve filling balance

Warp Analysis in injection molding

Running a Warp Analysis using the thermal strain results from a Flow Analysis ultimately to evaluate displacement and stress in the model structure.
Warp Analysis in injection molding


ページトップへ


Copyright © 2014 CYBERNET SYSTEMS CO.,LTD. All rights reserved.